Valve tails and tail nuts

Radiator valve connection MAH with self-sealing connection to radiator. For Dn 10 valves.

Washer for limiting thermostatic heads on radiator valves. M28

M22 straight nipple. Straight connector with M22x1,5mm threading

Radiator valve connection MAB with self-sealing connection to radiator. For Dn 15 valves

Use Quattro 2-pipe distributor to combine the simple installation of the 1-pipe system with the simple dimensioning of the 2-pipe system. Including shut off to the radiator.

Angle connection. In an angle, for threaded pipes with male thread and nut.

TP Coupling, Straight, for threaded pipes with internal thread and nut.

Transition nipple for radiators.

TP extension fitting M22x1.5 (12/15 mm)

Half-fitting, straight, for thin-walled pipe.

TX service kit for replacement of older radiators connected with steel pipe or loose valves

Eccentric fitting for M22 connection

Thermopanel Flex enables concealed installation with pex hose for middle connection.

TP 1-pipe distributor, switchable between 1-2 pipe system with c/c 40 mm connection.

Use Quattro 2-pipe distributor to combine the simple installation of the 1-pipe system with the simple dimensioning of the 2-pipe system.

Thermopanel Rak 4 enables pipe routing behind the radiator. For quicker installation and lower installation height.

Radiator valve connection angle short connection to radiator

Manifold connection for copper pipe.

Manifold connection for PEX pipe

Manifold connection Monoblocco for PEX pipe

The union connection is used for tap water, heating and cooling systems.

Description
The union-connection is used on soft and semi-hard copper pipes.
The union coupling is used on valves with flat and conical sealing surface. The pipe should be straight with a flat and perpendicular sealing surface that is free of cutting chips and damage.
The clamp ring effectively locks the copper tube and the rubber gasket is not damaged during assembly.
Always use support sleeve when mounting on soft copper pipes.
The semi-clutch is supplied in a plastic rail which facilitates handling and assembly.

PEX coupling with integrated support sleeve is used on heating and cooling systems.

Description
The couplings are with integrated support sleeve and universal. It is approved for connection of PEX pipes to ball valves with 1/2 ″ external pipe thread and having a 15 mm internal tapered contact surface.
It is also used for distributor pipes, transition nipples and other fittings with 1/2 ″ outer pipe thread and having a 15 mm internal tapered conical sealing surface.

Cap M22 x 1.5

M22 Angle for M22 connections

Inlet connection for radiator valves. Including nut and cone.

Inlet connection for radiator valves. Including nut and cone.

Valve connections for ANVD valve

Valve connections for EDV, REKV valves

Valve connections for outlet

Valve connections for outlet for connecting a radiator.

Valve connections for outlet connecting a unit

Radiator manifold nut

Radiator manifold olive

Evofit connection is used för hydronic systems to connect copper and PEX pipes to MMA products.

Evofit connection is used för hydronic systems to connect copper and PEX pipes to MMA products.

Evofit connection is used för hydronic systems to connect copper and PEX pipes to MMA products.

Cross-fitting with reversed supply/return.

Extension connection FRLK M22

Spud to bu used with Circuit valve F22/16 to make connections at the same level

Towel warmer valve inlet pipe

Couplings for towel warmer valves RFA38 and RFA75

Nut EM for pipe NG for RFA valve 61

ALUPEX coupling with integrated support sleeve is used on heating and cooling systems.

Description
The couplings are with integrated support sleeve and universal. It is approved for connection of ALPEX pipes to ball valves with 1/2 ″ external pipe thread and having a 15 mm internal tapered contact surface.
It is also used for distributor pipes, transition nipples and other fittings with 1/2 ″ outer pipe thread and having a 15 mm internal tapered conical sealing surface.

Bypass pipe c/c 40 mm with two male threads.

The castle valve is used, for example, in K-marked buildings or where you want to preserve the old style. Slot valve accessories are bend and nut, and tail and nut

Changeover M22/M18. M22x1,5 to G18 thread.

Changeover M22/M21. M22x1,5 to G18 thread.

Changeover M34/R20 used for RFA valve for changing old ARCU valves

Circuit saver F22

Clamping ring fitting with nut/cone G 3/4"/12. Fits underfloor heating and Ulow E2 fan radiator.

Cone for flat piping.

Spud to bu used with ML valves to make connections at the same level