
Actuators
Actuators control manifolds or single valves. Mainly for radiant heating and cooling in underfloor heating systems.

Unisenza Actuator 2-Wire
Normally closed, power 1 W, IP 54 in all mounting positions, with function indicator and snap lock, incl. adapter ring (adapter rings for other makes available on request), First Open function for easy initial installation. Extended 5 year warranty

VAF Actuator to dn 10-32 TOV
Thermal actuator VAF is used for control valve TOV in heating and cooling systems. The actuator has M30x1.5 thread, The actuator can be mounted without tools. Suitable for places where there are cramped spaces. The actuators have an on / off function. Normally Closed. The actuators can be used with PWM control as well. The actuators are intended for TOV valves with M30 connection and stroke of 2.5 or 5.5 mm.

Thermo actuator VAC
Thermal actuators VAC is used in secondary heating and cooling systems. The actuator is adapted to MMA's thermostatic valves with thread M28 * 1.5.

Thermo actuator VAO
Thermal actuators VAO is used in secondary heating and cooling systems. The actuator is adapted to MMA's thermostatic valves with thread M28 * 1.5 (ex FVR, Evoflow or Flexkoppel). VAO is regulated by room control center R41. VAO is also available with connection M30 * 1.5 for other valves make or underfloor heating distributor. The thermostat actuator's characteristic is "on / off". In the event of a power failure, the actuator NO opens. The actuator is provided with operating position indication above the nut. Red - closed. Black - open. The actuator is connected with the supplied cable attached to the underside of the actuator.

Thermo actuator WMWC
Thermo actuator VMWC is an on / off normally closed actuator. The actuator is used for MMA's thermostatic valves and underfloor heating distributor and is regulated with room control center R41. The thermostat actuator's characteristic is "on / off". In the event of a power failure, the actuator closes. The actuator is equipped with LED operating mode indication. Green LED voltage is on. Blue LED valve is open. LED is hidden under the enclosure. The actuator is connected with the supplied modular cable which is attached to the underside of the actuator.

Actuator Move 0-10V
The MOVE motorized actuator is designed for regulating MMA's valves with M28x1.5 or M30x1.5 connection and to be used togethter with thermostats enabelling modulating output (0-10V) to ensure precise and accurate control.
Description The MOVE actuator with high actuating power is suitable for valves with M28x1.5 and M30x1.5 connection. The actuator is a motorized actuator that adjusts the valve steplessly. The actuator adjusts itself to the correct stroke for each valve, between 2-8.5 mm.
Room controller with continuous output (0-10V) in individual room control systems.