Balancing Valves Static

Static balancing valves with low environmental impact

The STV R balancing valve is used to balance flows in heating and cooling systems.

Static balancing valves with low environmental impact

Static balancing valves with low environmental impact

Static balancing valves with low environmental impact

The manual balancing valve STV (M,F,G) is optimized for use in DHWC, heating- and cooling systems. STV (M,F,G) are sized with nomogram, handwheel or online Applications on smartphones or on our website. STV (M,F,G) shall be dimensioned at 50-80 % of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi). The pressure test ports are opened by unscrewing the lids. Differential pressure can be measured using a balancing instrument. STVM is equipped with a drain. The drain is opened with a screw driver. STVF Is equipped with extra long PT ports. Mounting direction is clearly shown with an arrow on STV (M,F,G). STV has internal ISO threads. STV NPT has internal NPT threads. STVG has external ISO threads. STV soldering have soldering ends ASME standard.

The manual balancing valve STV (M,F,G) is optimized for use in DHWC, heating- and cooling systems. STV (M,F,G) are sized with nomogram, handwheel or online Applications on smartphones or on our website. STV (M,F,G) shall be dimensioned at 50-80 % of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi). The pressure test ports are opened by unscrewing the lids. Differential pressure can be measured using a balancing instrument. STVM is equipped with a drain. The drain is opened with a screw driver. STVF Is equipped with extra long PT ports. Mounting direction is clearly shown with an arrow on STV (M,F,G). STV has internal ISO threads. STV NPT has internal NPT threads. STVG has external ISO threads. STV soldering have soldering ends ASME standard.

The manual balancing valve STV(E) is optimized for use in heating- and cooling systems. STV(E) are sized with nomogram, handwheel or online Applications on smartphones or on our website. STV(E) shall be dimensioned at 50-80% of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi).

The manual balancing valve STV (M,F,G) is optimized for use in DHWC, heating- and cooling systems. STV (M,F,G) are sized with nomogram, handwheel or online Applications on smartphones or on our website. STV (M,F,G) shall be dimensioned at 50-80 % of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi). The pressure test ports are opened by unscrewing the lids. Differential pressure can be measured using a balancing instrument. STVM is equipped with a drain. The drain is opened with a screw driver. STVF Is equipped with extra long PT ports. Mounting direction is clearly shown with an arrow on STV (M,F,G). STV has internal ISO threads. STV NPT has internal NPT threads. STVG has external ISO threads. STV soldering have soldering ends ASME standard.

The manual balancing valve STV (M,F,G) is optimized for use in DHWC, heating- and cooling systems.

The manual balancing valve STVA(E) is optimized for use in heating- and cooling systems. STVA (E) is a ANSI 125# flanged valve. STVA (E) are sized with nomogram, handwheel or online Applications on smartphones or on our website.
STVA (E) shall be dimensioned with 50-80% of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi)

The manual balancing valve STV (M,F,G) is optimized for use in DHWC, heating- and cooling systems. STV (M,F,G) are sized with nomogram, handwheel or online Applications on smartphones or on our website. STV (M,F,G) shall be dimensioned at 50-80 % of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi). The pressure test ports are opened by unscrewing the lids. Differential pressure can be measured using a balancing instrument. STVM is equipped with a drain. The drain is opened with a screw driver. STVF Is equipped with extra long PT ports. Mounting direction is clearly shown with an arrow on STV (M,F,G). STV has internal ISO threads. STV NPT has internal NPT threads. STVG has external ISO threads. STV soldering have soldering ends ASME standard.

The manual balancing valve STV (M,F,G) is optimized for use in DHWC, heating- and cooling systems. STV (M,F,G) are sized with nomogram, handwheel or online Applications on smartphones or on our website. STV (M,F,G) shall be dimensioned at 50-80 % of maximum flow for the design flow. Minumum recommended differential pressure is 2 kPa (0,29 psi). The pressure test ports are opened by unscrewing the lids. Differential pressure can be measured using a balancing instrument. STVM is equipped with a drain. The drain is opened with a screw driver. STVF Is equipped with extra long PT ports. Mounting direction is clearly shown with an arrow on STV (M,F,G). STV has internal ISO threads. STV NPT has internal NPT threads. STVG has external ISO threads. STV soldering have soldering ends ASME standard.

The measuring station MR is used when measuring the flow in heating, cooling and water supply systems. It is equipped with self-sealing pressure test ports. Measuring station MR has threaded connections ranging from DN15 to DN50. DN15 is also available in a low flow model.

The measuring station MR is used when measuring the flow in heating, cooling and water supply systems. It is equipped with self-sealing pressure test ports. The MR measuring station has flanged connections and is available in DN65-DN300, the measuring station is mounted between the flanges. The measuring station is electrolytic zinc plated.

The ML10 metering valve is used as a metering valve on mains for heating or cooling systems.

Insulation, drain and spareparts for STV valves

Lowlead Drain for Evobalance

Connections for STVG valves for copper pipe